Power outages have disrupted business in downtown Lakeland at least three times in 2026: on Feb. 20, July 17, and Oct. 20.
According to Lakeland Electric, from 2020 to 2025, the downtown electric system performed better than the national first quartile for reliability — customers in downtown Lakeland experienced fewer power interruptions, shorter outages, or both, compared with most utilities nationwide.
But, in 2025, Lakeland Electric noticed that performance was beginning to slip.
“Last year or two, we’ve had quite a few downtown outages. More than any other time,” said Scott Bishop, Lakeland Electric’s interim general manager. As a result, they began the Downtown Reliability Project to find the issues, fix problem spots, and replace aging equipment before it fails.
Bishop said the grid downtown is a combination of old and new infrastructure. He said while most of the development occurred in the 1990s, new growth like the Summit building and the Mirrorton apartment complex have brand new equipment.
“But things that were here originally that haven’t had the opportunity to get replaced are aged,” he said. “We’ve got to make sure that our infrastructure is being replaced on a 35 or 40 year amortization. Transformers are 35 to 40. Some conductors should be good for 50.”
Diagnosing behind the scenes
The diagnostic first phase of the project, completed in 2025, cost roughly $200,000.
Workers surveyed the downtown grid identifying spots that could possibly lead to issues and outages. They inspected every above-ground transformer and installed and repaired fault indicators that help linemen know when and where there could be an issue with equipment.
The first phase also included designing the multi-year plan for all necessary repairs moving forward.
In phase two of the project, estimated to cost $250,000, Lakeland Electric turned its attention to the grid supplying power beneath the streets in downtown — a task that sounds easier than it is.
To access underground the electric infrastructure, crews must first pump out hundreds and sometimes thousands of gallons of water, a process that can require coordination with the Public Works Department.
“All 62 manholes need to be pumped out, right? Because you’ve got to remember this stuff’s floating most of the year. You have to pump all the water out of it to then see it,” Bishop said.
Challenges underground
Some of the downtown manholes are 12 to 14 feet deep, said Travis Mcpherson, lead transmission/distribution lineperson. Workers must complete confined space training, and teams have to be prepared for the unexpected.
“You’re underground. Air could be a problem,” Bishop said. “We pump in oxygen so that you’re okay.”
After crews gain access to the underground equipment, linemen go underground with an infrared camera to identify problem areas. Temperature readings help linemen prioritize necessary repairs and get to work quickly if needed.
“It’s looking for anything hot,” said Matt Mills, Lakeland Electric troubleman supervisor. Infrared allows technicians to look for equipment that is operating at hotter-than-expected temperatures. “The heat is an indicator that that piece of equipment is starting to fail,” he said.
Once a problem has been identified, even more coordination is required for a repair. Coordination for repairs can begin as soon as the next 24 hours, according to Mcpherson.
“We come back again, take the outage in the evening, and work all night,” Bishop said. “We had to even close a couple lanes on South Florida a couple times to get in manholes in the middle of the road. There’s a lot of coordination effort, permitting, sidewalk closures, road closures.”
“It is difficult when you are trying to run a downtown and also fix infrastructure,” said Julie Townsend, executive director of the Lakeland Downtown Development Authority.
“We’ve got bars, we’ve got retail, we’ve got people open seven days a week, so it’s really difficult to try to schedule all that, but they’re committed to doing it and committed to keeping the downtown businesses aware of what’s happening and when, so that there aren’t those gotcha moments,” said Townsend.
Using the infrared imaging, Lakeland Electric has replaced 32 switch compartments and 32 transformers, according to Mills.
“By replacing those early, as we find them, it helps prevent outages,” said Cathryn Lacy, utilities marketing manager.
The team also admitted that things don’t always go as planned, and they can’t prevent every outage.
At the end of October, crews identified a problem-area, rerouted electricity to customers and de-energized the area, then replaced the failing equipment without incident. When the power was restored, the same piece of equipment within the same section failed in a completely different spot, causing an outage and necessitating another repair.
Looking forward to the next phase
The third phase of the project, to be completed in 2027, will include measuring the health and remaining life of cables, then replacing those that need it the most. Lakeland Electric estimates this will cost around $500,000.
In the final phase of the project that could cost around $1 million a year for three to five years, Lakeland Electric will continue replacing aging cables, transformers, switchgear, and connections.
According to Bishop, undertakings like the Downtown Reliability Project, are an ongoing reality for Lakeland Electric.
“We always look at our worst performing circuit — always, everywhere, the entire service territory,” Bishop said. “The reliability committee meets and says, ‘What circuit did we have problems in for that month?’ We hadn’t been downtown in the last five or six years because the reliability has been fantastic. Over the last year or so, the data changed on us, and now we’re spending more time here.”
“We’re always chasing the reliability, always,” Bishop said.
Anna Toms is a reporter for LkldNow, a nonprofit newsroom providing independent local news for Lakeland. Read at LkldNow.com.